Monday, 23 November 2009, marked the first particle beam collision inside the large detectors of the LHC. ALICE saw its first collisions at an energy of 900 GeV, enabling it to check for correct operation of the 18 large detectors which comprise it. Since 27 November, with just a few days worth of data, the collaboration has even published an article confirming some existing measurements. The group from the IRFU, who are responsible for the dimuon arms, had to await more stable beam conditions in order to see their detectors reacting to the data coming from the collisions and, on 6 December, all the gaseous detectors were able to be powered up. The traces from the first muons could be successfully reconstructed, to the great satisfaction to all the team. They are now eager to begin collecting more data after the planned restart in February 2010.
At the end of March 2009, the ALICE Muon Spectrometer took cosmic rays over a period of two weeks. The ALICE group at Saclay2 was closely involved in the design, development, construction and installation of a part of the chambers of this Spectrometer3. The purpose of the cosmic ray test was to check the performance of the entire system, from acquisition to reconstruction of the data. The acquisition system readout about a million channels and the data was recorded on the computing grid. Almost 15,000 tracks were reconstructed under conditions close to those of the real experiment. The cosmic test was a success, demonstrating the performance and the stability of the spectrometer chambers. It also revealed some weak points of the system. Tests are currently underway to correct the observed defaults.
Another cosmic test is planned for August, a few weeks before the first LHC beam injections, involving all ALICE detectors.
Since researchers have been confronting the standard model of particle physics with experimentation, nothing has been able to shake it. Of all particles it describes, only the Higgs Boson has not yet been discovered. But the standard model is probably not the ultimate theory: it does not cover gravitation and numerous experimental observations remain unexplained.
A new invariance, called supersymmetry, was suggested during the 1970s. It associates particles with different spins (integer spin bosons and half-integer spin fermions). It is possible to create supersymmetric extensions of the standard model, elegantly resolving the mathematical problems that emerge during calculation of the Higgs Boson mass.
D01 experiment accumulating data from Fermilab's Tevatron (United States) just published2 results relating to the Higgs Boson research needed for supersymmetric extensions to the standard model. All currently available data has been analysed, representing more than one and a half billion events.
In the Tevatron, a high-energy proton-antiproton collider, large quantities of Higgs Bosons could be produced if they are sufficiently light. A useful channel for detecting them is their production associated with a bottom quark3 (b), H0b. In 90% of cases, supersymmetric light Higgs Bosons are supposed to disintegrate into two bottom quarks. That is why research in this area is based on identifying those events involving at least three jets4 resulting from bottom quarks in the final state.
Until the advent of the LHC, the Tevatron at the Fermi National Accelerator Laboratory, Fermilab (close to Chicago, USA), will remain the world's most powerful collider and the only location where the top1 quark can be produced.
The DØ experiment recently published2 results on the measurement of the rate of production of top-antitop quark pairs. This quantity, which is dependent on the value taken for the mass of the top quark, enables a prediction to be made for that mass using the standard model3. The top quark, which was discovered at Fermilab in 1995, remains the subject of very active research. Methods of analysis and the quantity of data are forever improving, which is resulting in subsequent improvements in the accuracy of the measurement of the top quark mass. The precise measurement of this value, combined with results from other precision measurements, enables the most probable mass of the Higgs Boson to be estimated. Hence improved measurements of the mass of the top quark is tightening the vice in the search for the Higgs boson.
Since the restart of the LHC on 20 November, CMS has taken advantage of the excellent operating performance of the collider to record a large amount of useful data. This is now being used to check its correct operation and calibration. During this period, CMS has demonstrated the stability of the detectors' working conditions as well as the efficiency of the data analysis system, which sends data from the detector to analysis teams around the world, and this in spite of very rapidly changing beam conditions.
The new generation of detectors from the Edelweiss experiment, which is searching for dark matter, have just delivered their first results. Remarkably reliable and robust, they have proved excellent at removing interference signals. Although only just installed and not yet perfected, these new detectors have improved the experiment's sensitivity by a factor of 10 in terms of its capacity to measure an interaction with a "wimp"1 , a weakly interacting massive particle, which is one of the candidates for dark matter.
Article submitted to Phys Lett. B (online)
In 2010 the usable mass of detectors will be tripled in order to improve their discovery potential still further.
This jump in sensitivity puts this experiment in amongst the leading group of experiments worldwide that are seeking to detect these new particles. These first results have just been submitted for publication in the journal Physics Letters B
Engineers and physicists from IRFU have successfully assembled and commissioned three large chambers designed to reconstruct charged particle tracks. The chambers will characterize the neutrino beam used in the T2K (Tokai to Kamiokande) experiment. They are the first large Time Projection Chambers (TPCs) to be equipped with micromesh gas detectors (Micromegas). The chambers have a very large sensitive area (nearly 9m²) and a correspondingly high number of electronic channels (124,000). IRFU built the entire detection system of the three TPCs, comprising 72 Micromegas detectors and all the front-end electronics. Engineers from SEDI, a department specialised in detector, electronics and information technology, specially designed a new chip called AFTER and two printed circuit boards for sending digitised signals to the acquisition system via an array of 72 gigabit optical links. The three chambers were tested with a particle beam at TRIUMF in Canada and have been installed in JPARC (Tokai, Japan) at the end of 2009.
The first beam and cosmic ray tests demonstrated that tracks could be reconstructed with the required degree of precision. This achievement represents a major step forward in the construction of a vital detector for the T2K experiment.
The TPC are now detecting tracks produced by neutrino interaction in the near detector of T2K and provide superior information to measure the momentum and to identify these particles.
The second phase of the Double Chooz international experiment officially began on Wednesday 20 May. The Declaration of Intent signed by the four partners (CEA, CNRS, EDF, Champagne-Ardenne Region) is the first step in the plan to build a second detector devoted to neutrino research next to the Chooz nuclear power plant. Prior to signing the DOI, the participants visited the site of the first detector, currently under construction. By the end of the year, the detector should pick up the first neutrinos emitted by the plant and attempt to measure the disappearance of primary flux neutrinos. The second detector, which will be operational two years from now, will provide precise measurements of the flux and spectrum of the neutrinos emitted and greatly enhance measurement control and precision. Contact
PHoCEA DSM 2024 - Tous droits réservés - Mentions légales - Ce site utilise Twitter Bootstrap
Dernière mise à jour : May 06th, 2024
