Division of accelerators, cryogenics and magnetism

The LEAS (Laboratoire d'Etude des Aimants Supraconducteurs) at CEA Paris-Saclay has entirely manufactured a coil based on the superconductor Nb3Sn (niobium-tin), of the SMC (Short Model Coil) type. This coil is a short model intended to be assembled in a magnet structure, then to be tested at cryogenic temperature. Nb₃Sn is being considered for future accelerator magnets generating magnetic fields up to 16 T (teslas), which would double the performance of the best magnets currently in use. However, this requires a great deal of technological development. This type of short coil has been developed by Cern, in collaboration with the CEA, to allow the testing of new technologies and new manufacturing processes under conditions representative of future high-field magnets. The fabrication of the SMC-CEA coil took place at LEAS from May to October 2021, then the coil was delivered to Cern to be assembled in a structure, and finally tested in a liquid and superfluid helium bath, under high current, in a dedicated station. The tests delivered encouraging results, demonstrating that LEAS is one of the few European laboratories that now has all the capabilities to manufacture Nb3Sn superconducting coils. This proof of feasibility validates the first step of the development program of high field magnets for future accelerators.