For about fifteen years, the teams of the CEA's Fundamental Laws Research Institute and 3D PLUS, a company based in the Paris region, have learned to work closely together at the best international level to push the limits of high energy (2 - 1000 keV) spectro-imager performance for space applications. These are hard X-ray and finely pixelized gamma-ray detectors based on semiconductors (cadmium telluride CdTe) read by low-noise microcircuits designed specifically for Irfu and assembled in miniature hybrid components, weighing only 4 grams, made with the company's 3D PLUS integration technology.
To promote the development and applications of this technology, the result of a cooperation between research and industry, and to continue enriching this unique know-how, CEA-Irfu and 3D PLUS have just created a joint laboratory, ALB3DO (Advanced Laboratory for 3D Detection Device Developments).
The scientific objectives of the joint laboratory are twofold: realize in the short term a very high performance portable gamma camera demonstrator, with a first prototype available from 2022, and conduct research for the development of new X and gamma detectors with very high pixel density. Located at the CEA Paris Saclay center as well as at 3D PLUS at BUC, ALB3DO will start welcoming physicists, engineers, technicians, PhD students and trainees involved in this project, including five new employees, from the end of 2020. Within 5 years this activity should involve around 30 employees.
Caliste modules of the STIX instrument for the Solar Orbiter mission
For high energy astronomy, the Caliste detectors were a revolution: thanks to their pixelization, these instruments, real digital cameras with hard X-rays and gamma rays embarked on satellites, bring an image quality, a precision of dating of events, a sensitivity and a precision of measurement of the energy of each photon never reached before.
From this collaborative work between research and industry were born several generations of X and gamma detection modules. The latest one, which has been qualified for space, equips the focal plane of the STIX instrument on board the ESA (European Space Agency) Solar Orbiter space mission. Launched from Cape Canaveral in February 2020, Solar Orbiter is dedicated to the study of the sun.
The unique characteristics of the Caliste modules make it possible to imagine numerous applications outside the field of astrophysics. 3D PLUS and the CEA (French Atomic Energy Commission) have therefore studied the evolutions to be brought to this technology for a higher volume use in industrial fields such as nuclear control.
Within the ALB3DO joint laboratory, 3D PLUS and the CEA join as partners to promote the development of the technology:
Contact Irfu : Olivier Limousin
Caliste for the Spid-X gamma camera prototype. On the left, the module is equipped with a 14x14mm2 X 2mm thick CdTe crystal. On the right, we see the pixel pattern, 16x16 at 800µm pitch.
• Institute of Research into the Fundamental Laws of the Universe • Department of Astrophysics (DAp) // UMR AIM • The Electronics, Detectors and Computing Division
PHoCEA DSM 2024 - Tous droits réservés - Mentions légales - Ce site utilise Twitter Bootstrap
Dernière mise à jour : Nov 19th, 2024
