Resistive readout in silicon detector
Nicolo Cartiglia
INFN Torino
Mon, Oct. 26th 2020, 11:00
Zoom (see below)

In this seminar, I will present the implementation of the resistive readout principle to the silicon detector. Resistive Silicon detectors, also known as AC-LGADs,  are a  new kind of silicon detector that uses the combination of a continuous resistive readout electrode with AC readout to share the signal among pads. In this design,  the signal is collected on a continuous resistive electrode, and it is AC-coupled to pixel electronics. This technique leads naturally to signal sharing among pads, even in very thin sensor and without an external magnetic field.  

Our prototypes have shown that resistive readout works remarkably well, and, using the shared signals, the position resolution is extremely good (3-5 um), even with large pads (200-300 um).   These new sensors, combining internal gain and internal sharing, provide very good temporal resolution (~30-40ps), have a 100% fill factor, and, since they are 30-50 micron thick,  are ideal for systems requiring a very low material budget.

https://cern.zoom.us/j/95714965226?pwd=djFHZGF4eEQ4ZGM3UU82WHhDUHcwQT09

 


Add to my calendar -  Salle inhabituelle
Contact : Bruno LENZI

 

Retour en haut